This pas week Cummins has announced that INSITE version 8.6 has officially been released. The new update adds the ability to perform more diagnostic tests, adds new advanced ECM data, and many additional popularly requested features.
In this article we will break down all the new additions that have been made available in version 8.6.
INSITE 8.6 Features
- Calibration Security: New calibrations have been released using current industry standard encryption. If using an INCAL DVD with INSITE 8.6.0, calibrations must be from December 2019 or newer. These new calibrations can also be downloaded from Quickserve Online (QSOL) or ECM Code Search within INSITE. Any previous INCAL DVDs or downloaded calibrations will no longer be valid.
New Diagnostic Tests
NOTE: These will only display is supported and enabled in the calibration.
- Aftertreatment Engine Out NOx Sensor Test: This test is to diagnose the basic Engine Out NOx sensor functionality.
- Aftertreatment System Out NOx Sensor Test: This test is to diagnose the basic Engine Out NOx sensor functionality.
- Exhaust Throttle Auto Zero Test: This test will trigger the auto zero feature to run after an exhaust throttle has been replaced.
New Advanced ECM Data
NOTE: These will only display is supported and enabled in the calibration.
- Fuel System Performance Monitor: Used for viewing fuel system events and improve fuel system rail pressure isolation.
- Fuel Injector Power Control Reset: Allows users to reset the fuel injector life-cycle timers and tables after the installation of either a new injector or alternator.
New Features and Parameters
NOTE: These will only display is supported and enabled in the calibration.
- Starter Control Version 2: Provides the ability to interface with the Starter Control for natural gas applications.
- Idle Shutdown Extended Period: Allows an OEM to add an extended amount of time for idle shutdown period.
- Idle Shutdown Timer Override: Overrides the idle shutdown timer and reset it to the Idle shutdown period based on vehicle conditions.
- Smart Torque 2 Mass Type: Allows the ability to select the source of vehicle mass to use based on the application.
- Road Speed Control: Allows selecting different types of road speed control, resulting in different fuel economy improvement.
- Auxiliary OEM CAN4 Baud Rate: Facilitates the selection of baud rate for AUX OEM CAN4 channel.
- Gear Ratio Idle Adjustment: Adjusts No Load Speed (LSI) based on gear ratio.
- Push Button Start/Stop: Provides the ability configure the Push Button for starting and stopping.
New Product Support
- L9 CM2670 L131B
- F4.5 CM2620 F145B
- B6.7 CM2670 B162B
- X12 CM2670 X136B
- AFT 2.8/3.8 CM1881 BSVI
- AFT 5.3/5.7 CM1881 BSVI
- EACS CM1881
- QSK19 CM2350 K144G
- QSK38 CM2350 K145G
- QSK50 CM2350 K146G
Computer Specifications
Cummins INSITE remains one of the most demanding diagnostic software out there. If you are going to run INSITE on an older computer with weak or low performing parts you may experience extreme delays and long load times. The recommended computer specs for the program are some of the highest in the industry so if you want your diagnostic laptop to run smoothly it’s important to meet or exceed the minimum requirements, or purchase a complete diagnostic laptop kit that already comes with a high performance computer.
______________________________________________________________
Diesel Diagnostic Equipment has been a major supplier of diagnostic equipment for the medium & heavy-duty trucks & equipment since 1999. They have been providing laptop computers, diesel diagnostic software & hardware to local, state & federal government fleets, utility fleets, truck fleets & independent repair shops since ever since. They also provide ongoing support for their customer base, ensuring that their diagnostic laptops achieved maximum up-time.